December 4, 2022

Transpero

Tiny articles, big solutions.

Low Height Hydraulic Cylinder Descriptions

hydraulic cylinder description
Advertisement

Low Height Hydraulic Cylinder is widely used in synchronal lifting to replace the rubber bearing for bridge care, synchronous lifting for large apparatus maintenance, welding positioning of mechanical parts, assembly of apparatus, piping flange tray separation, and other application occasions, spring return design applies to place with a high degree of closure and maximum stroke is the primary factor as seen in RIVERLAKE HYDRAULIC products.

Product Features

  • Very Compact, flat design for where other cylinders won’t fit
  • FY-RSM-750, and 1500 have handles for relaxed carrying
  • Mounting holes give easy fixturing
  • High strength alloy steel for toughness
  • Sole acting, spring return
  • Hard chrome coated high-quality steel plungers
  • Plunger wiper decreases contamination, increasing cylinder life
  • Baked enamel finish for enlarged corrosion resistance
  • 3/8 “- 18NPT coupling and dust cap included on all models.

Industry Applications of Low Height Hydraulic Cylinder Descriptions

  • Synchronal lifting to replace the rubber bearing for bridge conservation
  • Synchronal lifting to replace the rubber bearing for very high-speed rail maintenance
  • Fine-tuning for synchronal lifting for urban viaduct construction
  • Fine-tuning for marine diesel engine connection
  • Synchronal lifting of steam turbine, equipment preservation in thermal power plant
  • Simultaneous departure of speed reducer and roller press maintenance in cement plant
  • Welding adjustment of locomotive industrial car body structure
  • Lifting operation of large gear installation and maintenance

Low Height Hydraulic Cylinders features

RIVERLAKE HYDRAULIC is offering low height hydraulic cylinders with, thin, short, and small versions for easy carrying and designed for use in all places made in high strength alloy steel to spread strength and life integral screw-rod designed hydraulic arrangement without extra oil pumps and hoses flat design for using in limited areas where standard cylinders will not fit rising and withdrawing height can do spinner control precisely and its correctness is up to 0.01mm. Some of the important features are:

  • Thin and low height designs, can use in limited spaces
  • Armed with aluminum alloy handle
  • Having a long life with the dust ring and the superior treatment surface
  • Having a rapid release coupling NPT 3/8 for easy use
  • Lined heat treatment of piston

Cylinder technical conditions, the size of the bee, using method are reliable with Chinese mainland standards and CE as shown in RIVERLAKE HYDRAULIC.

Advertisement

Nitro carburized surface treatment inside and out provides supreme sideload resistance and corrosion protection for safe use in the strictest conditions.

Applications of Hydraulic Cylinders

Some applications include maintenance, construction and lifting, and shifting jobs in agricultural and civil manufacturing machinery engineering, energy, marine, and gas, construction and infrastructure, wastewater and production, and also in process engineering. The new cylinders’ extensive reach also provides a safety and efficiency bonus by saving users’ time and shortening projects by moving loads further with each stroke, removing the use of temporary cribbing in applications counting machinery positioning and tool fastening. They also feature:

  • 3% side load on full capacity
  • Design security factor compliance with ASME B30.1
  • Mounting bolt holes for relaxed fixing
  • CR400 coupler for compatibility with normal product
  • High alloy steel for supreme strength, with nitrocarburized surface treatment

How to Choose the Right Low Height Hydraulic Cylinders

A hydraulic cylinder is a device that yokes the pressure generated in a hydraulic system to move a load. Due to the extensive variety of cylinder options to choose from, you will need to reflect your needs carefully when choosing a cylinder for your job.

Cylinders are multipurpose products. Not only are they used for thrilling and jacking, but also for pulling, holding, lowering, and clamping. Knowing the application, you need a cylinder to achieve is your first important step towards making the correct decision. Hydraulic cylinders are used for limitless applications.

To get maximum efficiency from them, maintain them well. Replace the parts like 3406b turbo as and when needed.

Many job sites include harsh conditions, whether that being dangerous heat, or the rough circumstances of a construction site. Cylinders with a nitrocarburized surface treatment have amplified corrosion protection. This makes them much more durable and ideal for exacting environments. You would not choose a cylinder that has a misshapen height of 16.5cm for a space that only has 12.7cm.

There are purpose-designed pipes made for jobs in confined spaces and these go by the name of low-height cylinders. Hydraulic cylinders are obtainable in single-acting and double-acting formations. A single-acting cylinder uses hydraulic pressure to spread the plunger and a return spring to bring it back to its original position.

A double-acting cylinder habits hydraulic force to both lifts and lowers the plunger. This provides much control and precision. If your load needs holding in place while you achieve your job, a cylinder with load holding is an innocuous choice.

Cylinders that hold your load, remove the time-consuming process of cribbing. There are 2 different types of cylinders that can be used in load holding. Locknut cylinders use mechanical support and cylinders with check valves. Each hydraulic cylinder is constructed to lift at a certain capacity.

There are general designs, which are your rudimentary options, and also high tonnage cylinders, and like cylinder stroke, the 80% rule also smears to tonnage. Manufacturers always list their supreme weight capacity as a safe limit. However, good practice with cylinders inspires users to only go to 80% of the manufacturer’s limit.